The figure shows the statistics for the interface.
Use the show frame-relay pvc [interface interface] [dlci] command to view PVC and traffic statistics. This command is also useful for viewing the number of BECN and FECN packets received by the router. The PVC status can be active, inactive, or deleted.
The show frame-relay pvc command displays the status of all the PVCs configured on the router. You can also specify a particular PVC.
After the statistics are gathered, use the clear counters command to reset the statistics counters. Wait 5 or 10 minutes after clearing the counters before issuing the show commands again. Note any additional errors. If you need to contact the carrier, these statistics help in resolving the issues.