As shown in Figures 1 to 4, the Smart Wi-Fi settings enable you to:
- Configure the router’s basic settings for the local network. This tool can be used to configure a DHCP Reservation, change the router’s administration password, change the IP address of the Linksys router, set up the Linksys routers with a Static route, set up the router with Cable Internet service, and configure the MTU Settings of the Linksys router.
- Diagnose and troubleshoot connectivity issues on the network. It contains the current status of the router and connected devices. It can also be used to perform a Ping test and a traceroute, to back up and restore the router’s current settings, to check the WAN IP Address, to reboot and reset the router to factory defaults, and to maintain of the router’s status.
- Secure and personalize the wireless network. It can also be used to enable and configure wireless MAC filter and connect devices easily using WPS.
- Keep the network safe from Internet threats by configuring the DMZ feature.
- View connected computers and devices on the network, and set up port forwarding.